व्यक्तिगत सुरक्षा उपकरण
(Personal Protective Equipment - PPE)
पूरी किताब के पेज 110 से 142 तक की जानकारी — आसान हिन्दी में, Point-wise और Bihar Board स्टूडेंट्स के लिए बिल्कुल सरल भाषा में।
👉 इस पोस्ट में व्यक्तिगत सुरक्षा उपकरण (PPE) से जुड़ी हर बात — PPE का परिचय, हैज़र्ड की क्लासिफिकेशन, बिजली के झटके से सुरक्षा, आँख-चेहरा-हाथ-पैर-सिर-कान की सुरक्षा, रेस्पिरेटरी सिस्टम की सुरक्षा, सुरक्षा बेल्ट, इंडियन स्टैंडर्ड्स और हल किए गए प्रश्नों को — बहुत ही आसान और सरल हिंदी में समझाया गया है। हर टॉपिक को छोटे-छोटे पॉइंट्स में लिखा गया है ताकि परीक्षा के लिए याद करना आसान हो।
📑 इस नोट्स में क्या-क्या है
- 8.1 PPE का परिचय
- 8.2 PPE की आवश्यकताएँ
- 8.3 हैज़र्ड का वर्गीकरण
- 8.4 PPE की Selectivity
- 8.5 बिजली के झटके से सुरक्षा
- 8.6 Live Line Working
- Faraday Cage व Live Line सिद्धांत
- 8.7 आँखों के लिए सुरक्षा उपकरण
- 8.7.1 Goggles के प्रकार
- 8.8 चेहरे और आँख की सुरक्षा
- Lenses, Shades व Antiglare Goggles
- 8.9 हाथ, बाँह व उंगली सुरक्षा
- Gloves के प्रकार व सामग्री
- 8.10 पैर व टांग सुरक्षा
- Safety Shoes व Guards
- 8.11 सिर की सुरक्षा
- 8.12 कान की सुरक्षा
- 8.13 श्वसन तंत्र सुरक्षा
- Air Purifying Respirators
- SCBE व Air Line Respirator
- 8.14 सुरक्षा बेल्ट
- 8.15 समरी टेबल्स
- भारतीय मानक (BIS Standards)
- हल किए गए प्रश्न
- सुरक्षात्मक वस्त्र व अन्य नोट्स
- अभ्यास प्रश्न
8.1 PPE का परिचय (Introduction)1
पेज 110- व्यक्तिगत सुरक्षा उपकरण (PPE) मानव शरीर से जुड़े होते हैं, ताकि उसे चोट से बचाया जा सके।
- इंसान का शरीर बहुत नाज़ुक होता है और चोट लगने की आसानी से संभावना रहती है।
- PPE का उपयोग बहुत गर्म या बहुत ठंडे और खतरनाक वातावरण में काम करते समय ज़रूरी होता है।
Safety Management के मुख्य काम
- सुरक्षा नियमों का निर्माण, प्रचार-प्रसार और लागू करना
- निर्माण स्थल के पास सुरक्षा नियम और उनका पालन आवश्यक होने की जानकारी दिखाना
- PPE की ज़रूरत के बारे में मज़दूरों को शिक्षित करना
- निर्माण मज़दूरों व औद्योगिक मज़दूरों को PPE उपलब्ध कराना
- मज़दूरों को PPE इस्तेमाल करने की ट्रेनिंग देना
- Safety Management को PPE को analyze, specify, select और recommend करना चाहिए
- मज़दूरों को PPE इस्तेमाल की संस्कृति के बारे में शिक्षित व convince करना, ताकि उसकी ज़रूरत समझ में आए
शरीर के संवेदनशील भाग (Sensitive Parts of Body)
- आँख: तेज़ रोशनी, कण, धूल, धुएं से संवेदनशील
- कान: शोर के प्रति संवेदनशील
- चेहरा: कण, तरल/धुआं-गैस और उड़ती वस्तुओं से संवेदनशील
- नाक, फेफड़े, रेस्पिरेटरी सिस्टम: रासायनिक धुएं, धूल, ज़हरीली गैसों से संवेदनशील
- हाथ, हाथ की उंगलियाँ: गिरती वस्तुओं, दुर्घटनावश टकराने से संवेदनशील
- टांग व पैर: गिरती वस्तुओं, घूमते हिस्सों में फंसने से संवेदनशील
- शरीर: बिजली के झटके, गर्मी-ठंड, रसायनों से संवेदनशील
- त्वचा: गिरती वस्तुओं, रसायनों से संवेदनशील
8.2 PPE की आवश्यकताएँ (Requirements)2
पेज 111किसी उपकरण की सुरक्षा के लिए सही उपकरण चुनने का आधार, उसका सामना करने वाला हैज़र्ड है। इसके नीचे दी गई आवश्यकताओं की सूची है:
- Adequate protection: उपकरण को हैज़र्ड के मुताबिक सही सुरक्षा देनी चाहिए
- Maximum possible weight compatible with efficiency: जितना हो सके हल्का वज़न, लेकिन प्रभावी
- No restriction of essential movements: ज़रूरी हरकतों में कोई रुकावट न हो
- Durability and susceptibility of maintenance
- Construction in accordance with the accepted standards for performance
8.3.1 Oxygen Deficiency (ऑक्सीजन की कमी)
- वातावरण में ऑक्सीजन की मात्रा सामान्य 21% (by volume) से कम होने पर इसे "toxic" या ख़तरनाक माना जाता है।
- यह हवा में ज़्यादा dilution या displacement से हो सकता है — जैसे टैंकों, होल्ड्स में।
- ऑक्सीजन की कमी, ऑर्गेनिक मैटर के decay, केमिकल रिएक्शन, नैचुरल ऑक्सिडेशन, जंग लगने से हो सकती है।
- 16% या इससे कम ऑक्सीजन के साथ हवा में साँस लेने से चेतना जाने या मृत्यु की संभावना बनती है।
- ऑक्सीजन की कमी सुरक्षा लैंप की लौ से या पल्स रेट बढ़ने से पता की जा सकती है।
8.3.2 Gaseous Contaminants (गैसीय संदूषक)
- Toxic, हानिकारक या Inert (निष्क्रिय) गैसें — जैसे टैंक, होल्ड्स में गैसें ऑक्सीजन को विस्थापित (displace) करती हैं।
(i) तुरंत जानलेवा (Immediately Dangerous to Life)
ये गैसें साँस लेने के तुरंत बाद जान को खतरे में डाल सकती हैं, या थोड़ी देर बाद इंजरी पैदा कर सकती हैं। "Immediately Dangerous to Life" वह concentration है जिसके ऊपर पहुँचने पर जान को खतरा हो।
(ii) तुरंत जानलेवा नहीं (Not Immediately Dangerous)
ऐसी गैसें जो लंबे समय तक बार-बार एक्सपोज़र के बाद ही जान को खतरे में डालती हैं। ऐसी गैसों की सटीक मात्रा और फॉर्मूला पता होना ज़रूरी है।
8.3.3 Particulate Contaminants (कणीय संदूषक — धूल, धुआं, कोहरा)
ये तुरंत ख़तरनाक नहीं होते, पर फेफड़ों में जाकर तीन ग्रुप में असर करते हैं:
- Toxic particulate contaminants: साँस के ज़रिए फेफड़ों में जाकर या चेस्ट-ब्लड में सिस्टमैटिक पॉइज़निंग/इरिटेशन/एलर्जिक रिएक्शन कर सकते हैं।
- Fibrosis-Producing dusts: ये blood stream में सीधे पास नहीं होतीं, पर फेफड़ों में जमकर pulmonary impairment (फेफड़ों की क्षमता कम) कर सकती हैं — उदाहरण: asbestos, coal, bauxite, free silica।
- Nuisance dusts: ये फेफड़ों में रहती हैं और blood stream में सीधे पास या dissolve हो जाती हैं (gaseous और particulate दोनों का combination)।
8.4 PPE की Selectivity4
पेज 112Selectivity यानी PPE चुनने का logic — क्योंकि सामान्य और असामान्य स्थितियों में इंसान के शरीर की क्षमता और PPE की क्षमता अलग-अलग होती है।
Three Pronged Strategy (तीन-स्तरीय रणनीति)
- Elimination of hazardous equipment: सबसे बेहतर तरीका — खतरे को शुरू में ही खत्म कर देना। उदाहरण: निर्माण स्थल पर हार्ड हैट पहनना, ताकि ऊँचाई से गिरने वाली वस्तु से सिर बचे।
- Safeguards in plant and protective equipment: मशीन/शॉप फ्लोर पर safety devices लगाना — जैसे एग्ज़ॉस्ट सिस्टम, गैस मास्क और कैनिस्टर।
- Use of PPE: जहाँ Elimination और Safeguards से पूरी सुरक्षा नहीं मिलती, वहाँ अंत में PPE का उपयोग करना।
Note: (1) और (2) दोनों (3) के लिए ज़रूरी हैं और (3) का विकल्प नहीं हैं।
वेल्डर की तीन ज़रूरतें
- आँख की सुरक्षा (Protection of Eye)
- बिजली के झटके से बचाव (Protection from Electric Shock)
- मांसपेशियों पर नियंत्रण खोने से बचाव (Protection against consequential loss of muscle control)
वेल्डर को hard hat पहनकर काम करना height attain velocity की possibility को eliminate करता है। protective headgear operator की eyes की protection minimize करता है। इसी तरह chipping का काम करते समय goggles पहनना ज़रूरी है ताकि उड़ते हुए chips से आँखें बचें।
8.5 बिजली के झटके से सुरक्षा (Protection Against Electric Shock)5
पेज 114- बिजली का झटका (Electric Shock) कम voltage वाले plant और equipment में भी हो सकता है।
- सामान्यतः विद्युत रखरखाव (electrical maintenance) 'dead' कंडीशन में की जाती है, जिसके लिए सप्लाई की निरंतरता की स्थितियों को समझना ज़रूरी है।
तीन ज़रूरी शर्तें
- Isolated: उपकरण/उपकरण भाग को सभी संभावित बिजली लाइनों (लाइव लाइन्स) से physically अलग किया जाना।
- Earthed: Isolators और breakers लगाने के बाद, उपकरण को earth किया जाना।
- Dead: उपकरण live नहीं है, यानी उस पर बिजली नहीं है।
चित्र 8.2 — Open Circuit-breakers and Isolators
Fig. 8.2 दिखाता है — दोनों तरफ से circuit-breakers और isolators खोलकर, earthing switches (E.S.W) बंद करके ही work zone under permit बनाया जाता है, जिससे काम शुरू करने से पहले पड़ोसी live parts से आने वाला current शून्य हो जाए।
8.6 Live Line Working (लाइव लाइन पर काम)6
पेज 115मेंटेनेंस/रिपेयर का काम conductors, insulators, structural parts आदि पर, बिना circuit को dead किए किया जाता है — इसे "Live Equipment Maintenance" या "Hot Line Maintenance" कहते हैं।
Hot Line Maintenance में शामिल काम
- Inspection from close distance while circuit is live
- Repair of conductors or busbars, while circuit is live
- Inspection/repairs/replacement of Insulator, with circuit live
- Live line washing of insulators
- Insulators/repairs/replacement of structural parts near the live parts
8.6.1 Three States of Circuit
- (A) Live: Connected to voltage source (also called Hot) — supply voltage से conductor connected है, invisible charged capacitance मौजूद है।
- (B) Isolated, not earthed: Disconnected not earthed (may have previous charge) — CB और isolator दोनों खुले हैं, पर earth switch (ESW) अभी बंद नहीं। Invisible capacitance अभी भी charged रह सकती है।
- (C) Dead-Earthed: Disconnected from source and earthed — CB खुला, ESW बंद, Voltage V=0, invisible capacitance discharged हो चुकी है।
Condition 'Dead-Earthed' सबसे सुरक्षित क्यों
Condition Live (Hot) को maintenance के लिए preferred किया जाता है, केवल exceptional circumstances में — जब यह safest की जगह अपनाया जाता है तो special tools और trained staff की ज़रूरत पड़ती है।
Special Tools व Faraday Cage — Live Line Maintenance7
पेज 115-1168.6.2 Special Tools for Live Line Maintenance
- Insulating ladder — आमतौर पर laminated fiber-glass resin insulated section या wood section से बनी होती है।
- Insulated tongs
- Clips on instruments
- Rods for installing earth connection clamps
- Sky lift (platform and Faraday cage) — जिसे raised, lowered, rotated, held in position from ground control किया जा सकता है।
8.6.3 Principles of Live Line Maintenance
- Telescopic insulating platform
- Insulating gloves, shoes, mats, support
- Special dress with embedded wire mesh which can be earthed to the cage
Faraday Cage (Fig. 8.4)
- Faraday cage एक ऐसा setup है जिसमें व्यक्ति insulated platform पर खड़ा होकर live conductor को छूता है, लेकिन cage उसे electric field से सुरक्षित रखती है।
- Person insulated earthed होता है — यानी शरीर के आस-पास electric field zero हो जाती है (Internal electric field zero — no shock)।
- Cage एक flexible conducting mesh से covered होती है, जो person के body को touch करती है।
- Cage flexible connection के ज़रिए live line से जुड़ी होती है, ताकि person और cage दोनों same potential पर रहें।
- Station earth conductor से भी connection रहता है, ताकि किसी accidental discharge की स्थिति में current person के शरीर से न होकर बाहर से गुज़रे।
Live Line Maintenance — दो सिद्धांत
- Principle 1: Person को ground/insulated part से insulated रखा जाता है, ताकि उसकी body से touch किए गए live part तक current न बहे।
- Principle 2: Person को touched live part के साथ earthed किया जाता है, ताकि उसका body और live part का contact voltage stress eliminate हो जाए — यह theory of electric field पर आधारित है, जिसमें एक closed cage of conducting material (Faraday cage) का उपयोग होता है।
Suitable safety tools, gloves, shoes आदि से person body ground से insulated होता है, लेकिन cage खुद live part से जुड़ी (touched) रहती है। इससे current the body की जगह cage से होकर बहता है, और person के contact में electric field stress नहीं आती।
Sky Lift Maintenance Persons
Maintenance persons insulating sky lift पर मौजूद working cage में खड़े रहते हैं, जिसे ground level से एक end पर mounted किया जाता है। Cage को suitable position पर raise, lower किया जा सकता है, और उसका metallic working cage/platform flexible conductor द्वारा live line से connected रहता है, जिससे मेंटेनेंस पर्सन live line के same potential पर आ जाता है। सावधानी बरतनी चाहिए ताकि व्यक्ति दो phases के बीच cone of negligible current flow में encroach न करे।
8.7 Protective Equipment for Eyes (आँखों के लिए सुरक्षा)8
पेज 117आँखें bright light, radiation, laser beams, poisonous gases, flying solid objects, dust etc. के प्रति संवेदनशील होती हैं।
आँखों को नुकसान पहुँचाने वाले Hazards
- Solids: flying particulate, dust, solid objects
- Liquids: chemical vapours, dust, solid objects (splash)
- Gases: exposure to poisonous gases
- Radiation: exposure to ultraviolet rays, bright light produced by an electrical arc in electric welding, laser beams, X-ray beam
- Stress
- Infection
Safety Goggles के लिए इस्तेमाल की Materials
- Safety Goggles with appropriate Lenses, Ventilation and Frame की सिफारिश की जाती है।
- Choice of Lens, Frame और Ventilation of goggles application के हिसाब से अलग-अलग हो सकते हैं।
- Safety Goggles को eye socket के पास closely fit होना चाहिए और maximum field of vision देना चाहिए।
Eye-protection goggles fit करने के लिए
- Non-corrosive
- Easy to clean
- Nonflammable
- Transparent portion में distorting light rays न हो
- Workers requiring corrective glasses के लिए special goggles उपलब्ध हों
8.7.1 Goggle के प्रकार (Types of Eye Protection Equipment)9
पेज 117Goggle
यह suitably shaped cover over eyes देता है, जो lens elastic headband के ज़रिए eyes के close रहता है ताकि vision permit हो सके।
In Welding Operation and Grinding Operation
यह flying particles से आँखों की protection देता है। Lens में specified impact strength और certain level of transparency होनी चाहिए। Disposable thin glass lens या plastic cover disposal replaceable होता है।
Equipment to protect eyes from flying particles
- For protection against flying particles, safety glasses adequate ventilation होल्स के साथ आती हैं जो goggles के enclosures में ventilation vary करती हैं।
- Choice of Lens, Frame and Ventilation of goggles application के according vary कर सकता है।
- For protection to irritating vapour, goggle must completely enclose the eyes so that vapour in the air does not make contact with the eye।
8.8 चेहरे और आँख की सुरक्षा (Protection of Face and Eye)10
पेज 119कुछ ऑपरेशंस में पूरे चेहरे की सुरक्षा ज़रूरी होती है, जिसके लिए face shield और eye protection दोनों की ज़रूरत पड़ती है।
Face Shield और Hood
- Face Shield पूरे चेहरे-आँखों की सुरक्षा देती है — flying particles, solid objects, relatively heavy particles और radiated heat/light से।
- Face Shields दो कैटेगरी में आती हैं — (1) Face Shield और (2) Hood।
- Face shield support headband और hinge से लगा होता है, ताकि raised या lowered किया जा सके।
- Material of face shield generally support strength और transparency से supported होता है — impact resistant, scratch proof, unbreakable।
Welders' Helmets
वेल्डर्स को खास हेलमेट पहनने की ज़रूरत होती है, जो face और eyes को radiant heat, thermal insulation, electrical insulation और high temperature से protect करता है।
Protection Against Laser Beam
Laser-tools में industrial measurements के लिए इस्तेमाल होते हैं। वर्कर की आँखें direct laser beam से exposed नहीं होनी चाहिए।
Protection of Computer Operators
VDU (Video Display Unit) मॉनिटर के सामने काम करने वालों को antiglare tinted plastic screen देनी चाहिए, ताकि glare कम हो और intensity of radiation minimize हो।
Spectacles
Glass या plastic lens vision correction के लिए। ये rigid plastic frame में temple bows से हेल्ड होते हैं जो fit over और in front of eye रहते हैं। Solid shield properly fitted होने पर goggle की जगह भी इस्तेमाल की जा सकती है।
Photo-chromatic Lenses
ये protective glare के खिलाफ इस्तेमाल होते हैं — bright light में lens darker हो जाता है।
Shaded Lenses, Antiglare Goggles व Chemical Vapor Lenses11
पेज 118-120Plastic Cover for Goggle
Transparent plastic cover fits well-over the covers, numbered spectacles या filters के impact से protect करता है। Grinding, buffing और अन्य light work के लिए इस्तेमाल होता है।
Antiglare Goggles with Shaded Lenses for Welders
ये specially designed sunlight reflected glare, bright light rays, flying sparks, acetylene welding और cutting, electric arc welding से protect करती हैं। Shade choice welding के प्रकार पर निर्भर करता है:
| Shade No. | प्रयोग |
|---|---|
| Shade 3 and 4 | Wood working, grinding, other light protection |
| Shade 5 | Light welding operation |
| Shade 6 | Light gas cutting and welding, up to 30 amperes |
| Shade 8 | Heavy gas welding, over 30 but not exceeding 75 amperes; arc welding upto 30 amperes |
| Shade 10 | Welding and cutting over 75 but not exceeding 200 amperes |
| Shade 12 | Arc welding and cutting over 200 but not exceeding 400 amperes |
| Shade 14 | Arc welding and cutting over 400 amperes |
Dust Protection Goggle
Special screen for ventilation से बनाई जाती है, safeguard for dust powder और small flying particles — welder, grinder, chipper, dressing of metals में इस्तेमाल।
Chemical Vapor Lenses
Rubber frame में molded होती है जो welder की face में fit होती है, कोई ventilation प्रदान नहीं होती, इसलिए eyecup से fogging (धुंधलापन) की समस्या हो सकती है।
Head Frame
ये welder के face को cover करने के लिए fitted होते हैं, हायर आर्म से fitted, चेहरे और स्थान से हटाकर आराम से inspection हो सकती है।
Wire-mesh Cover
Eyes covered और protected preformed side shield से string से secured होती है — flying particles से better ventilation देता है और fogging कम करता है।
8.9 हाथ, बाँह व उंगलियों की सुरक्षा (Arms, Hands, Fingers)12
पेज 120फिंगर्स, हाथ, बाँह की चोटें सालाना industrial disabling injuries का लगभग 30% हिस्सा हैं। लगभग 20% कुल worker's compensation इन्हीं injuries के लिए दिया जाता है।
Gloves
Gloves प्रोवाइड करती हैं protection to hand and fingers, hands और arms को fingers-hand protective attachments के इस्तेमाल के लिए develop किया गया है।
- Gloves with hand Cuff: hand और wrist end से material flow allow नहीं होने देतीं और protection देती हैं।
- Cot or Stall: lower forearm के खिलाफ heat, sharp objects, dirt से protective sheath या rubber cover होती है finger या thumb के लिए।
- Guard cuffs: lower forearm की protection करती हैं entering of dirt, dust, and hot metal से।
- Sleeves: forearm injuries, abrasion, cuts के खिलाफ protect करती हैं, wrist से elbow तक।
- Mittens: individual finger/hand skill की जगह पूरा हाथ ढँकने वाला mitten इस्तेमाल होता है, जहाँ manual skill की demand नहीं होती।
- Finger Cots or Stalls: individual finger या two/three fingers के लिए protection against burns, abrasion, cuts।
- Hand-Guards: पूरे हाथ की protection करते हैं gripping the hot, sharp, rough objects से।
- Hand-pads: palm cover करते हैं gripping the hot, sharp, rough objects और better grip देते हैं।
Gloves इस्तेमाल के नियम
- Gloves उन operators के लिए recommend नहीं की जातीं जो rotating machines पर काम कर रहे हों — क्योंकि gloves extending beyond the wrists मशीन में फँस सकती है।
- Caution: Gloves specific operation और protection के लिए select करनी चाहिए, glove cavity में liquid trap न होने पाए।
- Gloves न recommend करने योग्य स्थितियाँ: chemical solution, liquid solutions, electrical shocks, sharp objects और abrasive objects, hot parts
Gloves-Cuff Materials, Mitten, Cot व अन्य विवरण13
पेज 120-122Materials for Gloves and Cuff
Electrical Insulating Gloves
Electrical maintenance men और live line workers इस्तेमाल करते हैं specially made and insulation tested rubber gloves for protection against severe electric shocks। Resistance drastically कम हो जाती है जब holes या cuts आ जाते हैं, इसलिए electrical gloves clearance zone में free from cuts, human body parts से bore करना चाहिए।
Natural Rubber Gloves, Synthetic Rubber Gloves
Natural rubber gloves electrical insulation के लिए इस्तेमाल होती हैं पर petroleum products के लिए suitable नहीं। Synthetic rubber gloves (जैसे neoprene) petroleum products के लिए उपयुक्त हैं।
2. Mitten
Mitten एक ऐसा glove है जिसमें thumb और index finger separately divided होते हैं, बाकी तीन fingers combined रहते हैं। Mittens कुछ operations में preferred की जाती हैं जहाँ separately divided fingers की ज़रूरत नहीं होती और gloves से flash-over/electric shock का खतरा कम होता है।
3. Finger-Cot or Stall (Cover, Sheath)
Cot या Stall एक protective sheath है finger या thumb के लिए। Cot/Stall के लिए materials natural rubber, asbestos, leather, coated fabric with oil, chemical resistant to liquids/solids होते हैं।
- Materials for Cots and reinforcement — corrosive substances (liquids/solids) के आधार पर select होते हैं
- Cots दो या तीन fingers के लिए हीट, रफ या sharp edges से protection देते हैं
- Reinforcement wire-mesh (staples) या metal-mesh से हो सकता है
4. Hand-pads with Band-Cuff
Hand pads butcher/canneries में hot/rough objects से protection के लिए fold sewed to glove होते हैं या detachable होते हैं। Band-Cuff hand pad को wrist पर आसानी से fitting के लिए होती है।
Materials of Guard-cuffs (Point 6)
Guard cuffs lower forearm की protection करती हैं — प्लास्टिक (PVC), fabric with reinforcement (wool, felt, cotton duck), leather, fiber material से बनी होती हैं। Asbestos guard foundries में heat treatment furnace में इस्तेमाल होती है।
Sleeves — Materials
Sleeves भी guard cuff जैसी materials से बनते हैं — sleeve शोल्डर से wrist तक की protection देती है।
8.10 पैर व टांग की सुरक्षा (Protection of Foot and Leg)14
पेज 122Legs और Feet पूरे शरीर का वज़न carry करते हैं, इसलिए इनकी सुरक्षा operation area के हिसाब से जरूरी होती है।
Foot-wear जिन खतरों के खिलाफ protection देता है
- Falling objects
- Sharp objects
- Hot objects or heat
- Chemical liquid splash
8.10.1 Safety Shoes — Foot Protection के प्रकार
- Safety Shoes
- Safety Boots
- Leg Guards
- Chaps
Safety Shoes सबसे common foot protection device हैं। Sturdy, durable और comfortable डिज़ाइन की जाती हैं। Steel toe cover shoe की sole पर रहता है, जो static load और impact load enclose करता है।
Safety Shoes, Guard Cuff, Guards व Chaps के विवरण15
पेज 123-124Metal Toe Cover Shoes
- High insulating strength वाले Shoes with metal toe cover — foundries, mines, electrical maintenance, chemical industry, agriculture जैसी working situations में।
- Foot guards spark को reduce करते हैं (non-sparking) — abrasive surface पर चलते time।
- Guard को protection चाहिए heavier object falling से — leg से toe cover के flanges तक इस्तेमाल होता है।
8.10.2 Safety Shoes की दो श्रेणियाँ (Electrical Protection)
- (1) Conductive: static electricity discharges को ground तक conduct करते हैं (mining, electroplating, brewing में)
- (2) Non-conductive: electric shock से safety के लिए इस्तेमाल होती हैं जहाँ leakage current का ख़तरा हो — Rubber boots foot और part of leg को cover करते हैं।
8.10.3 Chaps
Chaps (Pants) heavy-duty trousers हैं without a seat, जो waistband से fastened होकर legs की rear side तक cover करते हैं। Materials of Chaps:
8.10.4 Guards for Foot, Shin, Ankle
Shin टांग का हिस्सा है knee और ankle के बीच। इन types के guards available हैं:
- Falling objects
- Flying objects
- Snapped ropes, slings
- Sparks and metal droplets from overhead welding
- Solar heat in outdoor locations
Foot and Shin Guard
Metallic protection है toe से knee तक, foot का fitting बिना shoe को हटाए, packing job foundry rooms में suitable रहता है।
Shin Guard
Heavy fiber material से बना protective shield है leg के front में, material handling में legs और strapped behind the leg से fastened, फ्लाइंग chips, sparks और heavy impact से protect करता है।
Heel and Ankle Guard
Foot guard जैसे same shape में conform होता है, extend backward from each side of the shoe, हील और ankle के striking से protect करता है।
8.11 सिर की सुरक्षा (Protection of Head)16
पेज 124Head को protection चाहिए इन खतरों से:
- Falling objects
- Sparks and metal droplets from overhead welding
- Snapped ropes, slings
- Trapping of operator's long hair in rotating parts of machine
Head Safeguards
- Hard Hats
- Protective Caps
1. Hard Hats
Special design के हैं provide protection to head against above mentioned hazards. Choice type work situation पर depend करता है।
2. Hard Hat with Visor and Peak
Hard hat एक brim all around head से protection देता है bright sunlight and heat of sun से।
Protective Caps with Visor and Peak
Cap नहीं होता brim close to the head. Cap provides covering for the head and hair, made of cloth or similar material। Caps may be equipped with a visor (transparent attachment) — cap perpendicular to face — heat/sun की warning देती है।
Metallic Shields
Long hair वाले workers के लिए worn to prevent entangling of hair to obstructing the vision — machines के close working जगह hats के साथ।
Insulating Protection Hats
Electrical maintenance workers के लिए worn — low space, brim-less semispherical hard hats may be preferred, फ्रंट, रियर और top पर peaks (cap type) के साथ compromise achieved by using hats to hold on to the head।
8.12 कान की सुरक्षा (Protection of Ear)17
पेज 125-126Sound waves longitudinal pressure waves होती हैं जो air, water, solid के ज़रिए propagate होती हैं। Sound तब सुनाई देता है जब pressure waves listener के कान तक पहुँचती हैं। Loudness perception decibel (dB) unit में express होती है।
तालिका 8.2 — Industry में Observations
| Noise Level | Complaints |
|---|---|
| < 50 dB (A) | No complaints |
| 54 to 60 dB (A) | A Few Complaints |
| > 65 dB (A) | Many Complaints |
Acceptable Noise Levels (उदाहरण)
- Industrial Area: 30 dB (A)
- City Residential Area: 28 dB (A)
- Rural Area: 22 dB — measured 25 m from source
Weighting Curve A
Sound levels dB में measured होते हैं sound-level meter से। Sound levels frequency के साथ weighted किए जाते हैं reference to Frequency versus Sound-level curves — इसे Weighting Curve A कहते हैं, जो industrial noise measure करने के लिए इस्तेमाल होता है, और measurement को dB(A) कहा जाता है — जो human ear की sensitivity को reflect करता है।
8.12.1 सुनने के लिए PPE — Industrial Equipment
Industrial equipment ऐसा design होना चाहिए ताकि sound levels सीमा से कम रहें। Loud sound cannot minimize हो तो barriers, absorbers, reduced speeds से redesign किया जाता है — Personal Protection Devices ears को cover करते हुए fitted होती हैं ताकि sound को blocked किया जा सके।
1. Ear Plugs
Sound reaching the ears को लगभग 50 dB(A) तक reduce करते हैं। Soft rubber inserts hard plastic covers formed to fit wearer's ears में सुनने की listening of speech को improve करते हैं even in the presence of high noise level।
2. Cushion or Doughnut
ये placed over ears होते हैं rubber, metal या plastic selected to damp sounds of certain frequencies।
3. The helmet
Special helmets enclose the face, area of head के लिए maximum effectiveness against extremely loud and high intensity sounds/noises।
8.12.1 Attenuation Versus Frequency of Sound
Reduction (attenuation) achieved by a protective device एक frequency के reference से expressed होती है। Attenuation different frequencies के साथ vary करती है। Maximum reduction proper fitted device से achieved होता है।
8.13 श्वसन प्रणाली की सुरक्षा (Protection of Respiration System)18
पेज 126-129Industrial workers को fresh unpolluted air चाहिए, free from industrial pollutants। Air inhaled respiratory system के ज़रिए nose से (या कभी-कभी mouth से)।
8.13.1 Choice of Respiratory Protective Devices
- Work place में principal contaminant क्या है?
- Contaminants के chemical, physical, toxicological properties क्या हैं?
- Life के लिए स्थिति कितनी serious/dangerous है (emergency) या prolonged/continued exposure के बाद ही injurious है (routine-non-emergency)?
- क्या Equipment operating conditions में User Friendly है?
8.13.2 Mechanical Filter Respirator (Fig. 8.8)
ये Routine (nonemergency) Respiratory Protection Equipment के तौर पर इस्तेमाल होते हैं। Face-piece nose और mouth के ऊपर band-belt से fit किया जाता है।
- Filtered air wearer द्वारा inhaled होती है। Equipment में face-piece होता है जो mouth-nose (कभी-कभी eyes भी) covers करती है, जिससे filter element (bag, cylinder या disc) attached रहता है।
- Filter discs particulate airborne contaminants को trap करते हैं physical trapping और electrostatic attraction से।
- Simple mechanical filter respirators gases और vapors के खिलाफ कोई protection नहीं देते।
- Filter को discard और replace करना चाहिए जब breathing laborious या uncomfortable हो जाए।
8.13.3 Chemical Cartridge Respirators (Fig. 8.9)
Air filtered by mechanical filter discs या substance। Filter discs poisonous gases को chemically absorb करते हैं (जैसे hydrogen cyanide, carbon monoxide)। Chemical cartridge-type gas masks इस्तेमाल के लिए limited हैं वहीं atmospheres जो oxygen में deficient न हों।
8.13.4 Air Line Respirator (ALR) (Fig. 8.10)
Protective equipment supplies air to worker through pressure hose of small diameter, high-pressure fresh air source से। Air supply usually obtained via a pressure reducing valve compressed air line/plant-factory के through।
8.13.5 Hose, Mask with Blower (Fig. 8.11)
Closely fitting face-piece covering eyes, nose and mouth से attached to a hose line of strong walls। Fitted at one end to hand or mechanically operated blower — blower fresh air supplies to face-piece.
8.13.6 Hose-Mask Respirator without Blower
Hose length small और inlet to air hose fresh air intake point तक जाती है, बिना external device से। Face-piece पूरी तरह cover करता है eyes, nose और mouth।
8.13.7 Self Contained Breathing Equipment (SCBE) (Fig. 8.14)
Precautionary measure — toxic atmosphere में worker को surrounding air inhale नहीं करना चाहिए। Air for breathing should be supplied by the SCBE equipment। Wearer independent of any external air supply। Air from:
- Compressed oxygen cylinders, या
- Compressed Air in Cylinders plus Oxygen produced by chemical action within the equipment
Air Purifying Respirators — Canister, Mechanical व Chemical Filters19
पेज 137-139(i) Canister Gas Masks
Consists of a canister containing appropriate chemical, full face-piece and body harness to hold the canister in place on the body of the wearer। Air is drawn through the canister by wearer's own breathing। Canisters designed for specific gases और should be used only for that type of gas।
(ii) Chemical Cartridge Respirators (see 8.20)
Cartridges filled with chemicals, usually attached to a half mask with appropriate chemicals to absorb gases or vapour drawn through them। ये non-emergency chemicals absorb करते हैं।
(iii) Self-rescue type Respirators
Designed to provide the greatest possible respiratory protection consistent with practicability of carrying the device at all times, so that it is always available for use during escape। Life of the canister, filter element, mouth piece, a nose clip और means of carrying it conveniently on the body — इनकी extent of protection afforded सीमित होती है।
Mechanical Filter Respirators
ये remove particulate matter from the inspired air — single use या reusable type — filter को regularly replace किया जाना चाहिए क्योंकि dust particles clogged हो जाते हैं।
Combination of Chemical and Mechanical Filter Respirators
Ye remove toxic gases and vapour and particulate matter दोनों from inspired air, जैसे spray painting work में।
Selection of Respirator — Factors
- Nature of the hazard
- Severity of the hazard
- Type of contaminant
- Concentration of contaminant
- Period for which respirator protection must be provided
- Location of the contaminated area with respect to a source of respirable air
- Expected activity of the wearer, and
- Operating characteristic and limitations of the available respirator
Care of Respirators
- Why it is to be used
- How it is to be used?
- Checking that it is in good operating condition
- Fitting of respirator on the wearer, and
- Proper use and maintenance of the respirator
SCBE Types व Air Line Respirator (Solved Details)20
पेज 131, 137-138Compressed Air Oxygen Cylinder Recirculating Type
Wearer oxygen inhale करता है cylinder से pressure reducing और regulating valve के ज़रिए, one-way breathing valve से breathing bag में। Wearer exhaled breath bag में जाकर chemicals को carbon dioxide absorb करने देती है, और moisture निकाल देती है।
(b) Oxygen-Regenerating, Recirculating type Self-contained Breathing Apparatus
Moisture content wearer's exhaled breath से चेमिकल कैनिस्टर में liberate oxygen करती है। Exhaled carbon dioxide granular chemicals द्वारा absorbed। Oxygen breathing bag में enters और corrugated breathing tube face-piece को connect करती है।
Respiratory Protective Equipments — Classification (Solved Q1)
- Air Line Respirator: Air supplied continuously to the face piece at least 110 litres per minute, या demand type जिसमें actuated by slight negative pressure created when wearer inhales।
- Suction Hose Mask: Full face-piece connected to a large diameter flexible hose, wearer draws air by his own breathing effort।
- Pressure Hose Mask: Air forced through a large diameter hose by a hand or motor operated blower, blower is to be operated continuously while the mask is in use।
- Self Contained Breathing Apparatus: An integral part of the apparatus obtains respirable air of oxygen from compressed air or oxygen cylinder — either compressed air/oxygen breathing apparatus या recirculating type (chemical oxygen generating)।
8.14 सुरक्षा बेल्ट (Safety Belts for Industrial Operation)21
पेज 132Safety Belts workers को गिरने से protect करते हैं heights या from falling due to sudden electric shocks/mechanical jolts, speeding vehicles/turn पर।
- Fall of a person from height due to sudden Electric shocks/mechanical jolts serious injury/death में result कर सकता है — इसलिए worker को specially designed safety belt या harness पहनना चाहिए line को secured anchorage से fastened।
- Webbing सामान्यतः leather से बेहतर मानी जाती है, क्योंकि इसमें greater strength और stretch (worker के body को stopping load कम करने के लिए) होती है।
- Leather का impact load तीन-चार गुना ज़्यादा हो सकता है, क्योंकि webbing लंबी line में gradual step के साथ fall को take करती है, shock absorber या decelerating device से जिससे impact load कम रहता है।
Safety Belt/Buckle का सही इस्तेमाल
Belt का buckle correct method of fastening से folded back और inserted through the buckle में hold होना चाहिए ताकि free end complete closure हो जाए — इससे necessitates the free end holding strength properly employed रहती है।
8.15 Personal Protective Equipment — Summary Tables22
पेज 133-135Personal protective equipment industrial workers को provide किए जाते हैं hazardous conditions से — जैसे excessive heat, sharp objects, toxic gases। Safety belts height पर काम करने वाले workers के लिए mandatory होते हैं।
Table 8.3 — Summary of Personal Protective Equipment and Costumes (Organ-wise)
| Protected Part | Personal Protective Equipment |
|---|---|
| 1. Protection against Electric shock | Insulating Gloves/Shoes, Faraday Cage, Insulated Tools, Safety Belt against fall |
| 2. Protection of Eye | Goggle, Cover goggle, Spectacle, Shields, Combination lenses, Dust screen, Head frame, Lenses, Wire mesh |
Table 8.1 — Parts of Human Body Requiring Protection
Head, Eyes, Ears, Face, Throat, Neck, Chest, Front Torso, Shoulder-Upper Arm, Elbow, Hand-Complete, Fore Arm, Wrist, Thigh, Hip, Palms, Thumb, Hand & Fingers, Groin, Knee, Legs Complete, Shin, Ankle, Feet, Lower Feet — ये सभी body parts protection के लिए listed हैं।
Table 8.4 — A guide to use of Personal Protective Equipment
| Protected Part | Equipment |
|---|---|
| Head | Fibre helmet, Electrical resistance helmet, Crash helmet |
| Face | Plastic face shield, Welding helmet and shield, Asbestos hood, Welder's leather cap |
| Eye | Panorama goggles with clear plastic visor |
| Foot & Legs | Leg guards, Leather safety boots, Asbestos safety boots, Gum boots |
| Hand | Leather gloves, Asbestos gloves, Electrical resistance gloves, Acid and alkali proof rubber gloves, Canvas gloves |
| Body | Leather apron, Asbestos apron, PVC apron, Lead apron, Safety belt |
| Nose | Dust respirator |
| Ear | Ear plugs, Ear muffs |
Table 8.4 इन Protects Against भी बताती है — जैसे hitting object during handling/erection, electric shock, high-speed vehicles, welding fumes, molten slag, panorama goggles oil-paint splashes से protection आदि।
Fig. 8.17 — Summary Diagram of PPE and Costumes
भारतीय मानक — BIS Indian Standards for PPE23
पेज 136Table 8.5 अलग-अलग body parts के लिए Bureau of Indian Standards (BIS) के standard numbers देती है:
Protection of Body
| Title | BIS No. |
|---|---|
| Aprons, lead-rubber, X-ray protective | 7352-1974 |
| Aprons, rubberized, acid and alkali resistant | 4501-1967 |
| Belt and strap, leather | 3521-1965 |
| Lineman's clothing, leather, protective | 6153-1971 |
| Fabrics, PVC coated for four weather clothing | 3322-1965 |
| Guide for selection of industrial safety equipment for body protection | 8519-1977 |
Protection of Face, Eyes and Ears
| Title | BIS No. |
|---|---|
| Guide for selection of industrial safety equipment for eye, face and ear protection | 8520-1977 |
| Equipment for eye and face protection during welding | 1179-1967 |
| Filters protective for welding, cutting and similar operations | 5983-1971 |
| Glass, safety | 2553-1971 |
| Guide for selection of industrial safety equipment for body protection | 6229-1971 |
Protection of Hands
| Title | BIS No. |
|---|---|
| Gauntlets and mittens, leather (First Revision) | 2573-1975 |
| Gloves, rubber for electrical purposes | 4770-1968 |
| Gloves, safety, industrial Leather and cotton gloves (Part I) | 6994-1974 |
Protection of Feet and Legs
| Title | BIS No. |
|---|---|
| Ankle boots for general purposes | 583-1969 |
| Boots and shoes, safety leather for mines and heavy metal industries (second revision) | 1989-1973 |
| Gloves, safety, industrial leather and cotton gloves | 2745-1969 |
| Helmets, protective for scooter and motor cycle riders | 2925-1975 |
| Footwear, safety code of practice for selection, care and repair | 4128-1967 |
| Knee boots, safety and industrial rubber | 6519-1971 |
| Gaiters, protective | 2472-1969 |
| Toe caps, protective steel for footwear (First Revision) | 5557-1969 |
Protection of Head
| Title | BIS No. |
|---|---|
| Helmets, Firemen's (First Revision) | 2745-1969 |
| Helmets industrial safety (First Revision) | 4151-1976 |
Protection of Lungs
| Title | BIS No. |
|---|---|
| Breathing apparatus, self contained for fire brigade use | 1910-1961 |
| Colour identification markings for air purifying canisters and cartridges | 8318-1977 |
| Glossary of terms relating to respiratory protective devices | 8347-1977 |
| Respirators, canister type (gas masks) | 8523-1977 |
| Respirators, Chemical Cartridge | 8522-1977 |
| Helmets, steel for civil defence (First Revision) | 2279-1968 |
हल किए गए प्रश्न (Solved Questions)Q
पेज 137-141Q1. Various types of respiratory protective equipment समझाएँ।
उत्तर: Respiratory Protective Equipments दो मुख्य श्रेणियों में classified हैं — Supplied Air Respirators (Air line respirator, suction hose mask, pressure hose mask, self contained breathing apparatus) और Air Purifying Respirators (Chemical filters, Mechanical filters, Combined mechanical and chemical filters respirators)। Chemical filters में canister और cartridge type शामिल हैं, self contained breathing apparatus में rescue type भी आता है।
Q2. Selection of Respirator and its care पर short notes लिखें।
उत्तर: Following factors respirator selection में consider किए जाते हैं — nature of hazard, severity of hazard, type of contaminant, concentration of contaminant, period for which protection provided, location of contaminated area, expected activity of wearer, and operating characteristic/limitations of available respirator।
Q3. Head protection, Eye and Face protection, Foot and Leg protection, Body protection पर short notes लिखें।
- Head Protection: Numerous eye injuries caused by dusts, flying particles reflected light, glare and radiant energy — soft caps और hoods dangerous materials के लिए used, PVC fibre glass laminated plastic या vulcanized fibre welding face screen, antiglare masks helmets के लिए sufficient clearance between the top of the head and shell के साथ appropriate materials से बनाए जाते हैं।
- Eye and Face Protection: Numerous eye injuries caused by dusts, flying particles, molten metals, radiation। Hazards को cover करना मुश्किल होता है, इसलिए goggles required होती हैं।
- Hand and Arm Protection: Protection of the hands and arm becomes necessary when workers have to handle materials having sharp edges and molten metals, chemicals, and corrosive substances। Common devices — safety spectacles, mono-goggles, face shields, tight goggles, gas welding helmets, hand-guards, gauntlet, gloves, wrist globes, mittens, hand pads etc.
- Foot and Leg Protection: Adequate foot protection may have to be provided workers को risk of injury में हो — Common foot and leg protective devices — shoes and boots, leggings, foot-guards, leg-guards। Legs और shoes के लिए natural rubber, synthetic rubber, neoprene, steel toe-box, inner steel sole, asbestos, leather material से बनते हैं।
- Body Protection: कुछ मामलों में complete coverage of the body आवश्यक होता है — form of aprons, overalls, jackets and complete head to protective suits।
Q4. Protective equipment and tools पर brief note लिखें।
उत्तर: हर job के लिए adequate and approved protective equipment provide किया जाना चाहिए। If a worker needs complete coverage, no compromise should be made with the use of such tools and equipment to all employees of the plant explain the proper use।
Q5. Specification and use of Rubber Gloves, Galoshes, Hoods, Mats, and Blankets पर short note लिखें।
उत्तर: Right hand gauntlet wears out more quickly than the left hand one और in cases of this type the whole pair should be condemned। Under no circumstances a left hand gauntlet should be allowed to be used on the right hand। Rubber equipment should not be exposed to oil or grease और not be in use its exposure to sun। Galoshes, hoods gloves और gauntlets should be used when working on or near live voltage below 5000 volts phase to phase।
Q6. Goggles and eye shields, Hand lines and canvas buckets, Protective temporary barriers, Safe supports पर short notes लिखें।
- Goggles and eye shields: Employees must wear approved type of goggles or eye shields wherever there is a danger from harmful radiations, fumes or flying particles।
- Hand lines and canvas buckets: All tools, protective equipment and light material should be raised or lowered by means of hand lines or canvas buckets, no tool being tossed up or thrown।
- Protective temporary barriers: Before re-issue goggles and eye shields should be sterilized and thoroughly washed in warm water and dried।
सुरक्षात्मक वस्त्र (Protective Clothing) व Safety Rules25
पेज 141-142Protective Clothing and Footwear
- Each piece of equipment को examine करना चाहिए employee के by before और after its use। कोई भी defective tools या equipment found होने पर तुरंत withdrawn from service होना चाहिए।
- Plant should provide storage racks and suitable bags for safe storage and carriage of protective equipment।
- Working clothes should fit well — कोई loose dhotis, pyjamas, flaps, strings, neckties, key chains या watch chains near moving machines के पास नहीं होनी चाहिए।
- Employees exposed to danger of falling material should wear safety shoes और safety hats।
दस्ताने और चश्मे — सामान्य सुरक्षा नियम
- When necessary, employees should wear suitable leather gloves to avoid physical injury।
- यह remember रखना चाहिए कि gloves जो torn या unsewn हैं, worse hazard देती हैं no gloves at all से।
Linemen's Belts
Employees working on poles या structures over 2.5 m from ground must wear linemen's belts। Belts में chains और wire hook होते हैं, जिसे pole और live apparatus के around पास किया जाता है, ताकि rapid deterioration of rubber से बचा जा सके।
Rubber equipment ozone causes rapid deterioration न हो, इसलिए इसे preservative रखना चाहिए। Rubber equipment near live parts में scratches और abrasions से पहले और बाद examined होना चाहिए।
Breathing Apparatus Rules
Employees should use approved type of breathing apparatus, in places where there is concentration of toxic gases or vapour or dust masks etc.
Safe Supports
No employee, pole or any material, scaffold, ladder or any other elevated structure should be supported on any portion of a tree, pole structure, unless the support is adequately strong and properly secured in place।
Ladder Safety
- All portable ladders should be equipped with non-slip bases and care should be exercised in placing and lashing the ladder held by someone.
- Ladders should not be placed in front of doors or windows opening towards or concrete surfaces, unless the door is locked.
- While going up or down a ladder, always face the ladder, use both hands for climbing.
- Ladders with weakened, broken or missing steps or otherwise defective should be repaired or made of dry plywood or masonite, and use should not be used until repaired.
Protective Temporary Barriers
When work is conducted along public street or highways, pedestrians and vehicular traffic shall be warned by signs and flags by day and red lights or flares by night। A signal man shall be posted। Barriers shall be placed around hazardous operations, open manholes, and exposed open ditches and excavations।
Breathing Apparatus (Point c)
Hand line should be at least twice as long as the highest point of suspension of the work in hand।
❓ अभ्यास प्रश्न (Practice Questions)
- What are the aspects to be considered in selecting eye protecting equipment?
- Explain different types of personal protective equipments and clothings used by industries for following purposes.
- Write short notes on the following: (i) Personal protective equipment (ii) Head protection (iii) Body protection (iv) Foot and leg protection (v) Eye protection (vi) Finger, hand and arm protection (vii) Respiratory tract protection (viii) Breathing apparatus (ix) Safety Belts.
- What are the protective devices for hand while selecting face shielding equipment?
- What are the considerations while selecting face equipment?
- Describe three types of personal protective devices for hands, indicating some typical uses of each.
- Describe three types of protective shoes or leg guards, indicating a typical use for each.
- What would be the permissible value for noise level beyond which continued exposure might result in hearing damage?
- Name three types of ear protectors and discuss the general effectiveness of such devices in general.
- Explain some functional requirements considered in the selection of devices for personal respiratory protection.
- Mention one general limitation on the conditions for using safety belts for work situations.
- Discuss steps to be taken for acceptance of personal protective equipment by employees.
0 Comments